Agilent Technologies MX3000P User Manual

Installing the Fuse
Important Do not turn on the instrument until you have installed the
fuse holder. The fuse is required for proper instrument
operation.
1. Remove the label located over the power entry module on the back of
the instrument just above the power switch.
2. Use a small flathead screwdriver or similar tool to open the fuse box.
3. Unpack the fuse holder from its shipping container.
4 Mx3000P and Mx3005P QPCR Systems Setup and User’s Guide

Agilent Technologies MX3000P Specifications

General

Brand	Agilent Technologies
Model	MX3000P
Category	Laboratory Equipment
Language	English