Installation Note E4440-90613 43
Installation Procedure
Install New Instrument Firmware
Download the PSA Update Program and the PSA Firmware Procedure from
http://www.agilent.com/find/psa_firmware Follow the directions to install the firmware.
Alternate method:
Install the Firmware Upgrade Kit E4440AU Option UE2.
Verify the Option is enabled
Check for the presence of option 123 by pressing
System, Show System and looking for
123 in the Options section of the display.
Check for the recognition of new hardware by pressing
System, Show Hardware and
looking for the Option Driver Assembly.
To Next Page
Loading...
Need help?
General
