Agilent Technologies U1231A - Calibration Error Codes; Table 1-4 Calibration Error Codes

1 Calibration Procedures
Calibration Error Codes
28 U1231A/U1232A/U1233A Service Guide
Calibration Error Codes
The following errors indicate failures that may occur during
a calibration.
Table 1 - 4 Calibration error codes
Code Descriptions
Er002 Calibration error: secure code invalid
Er003 Calibration error: serial number code invalid
Er004 Calibration error: calibration aborted
Er005 Calibration error: value out of range
Er006 Calibration error: signal measurement out of range
Er007 Calibration error: frequency out of range
Er008 EEPROM write failure