AgileX SCOUT MINI - Computing Unit Login and Shutdown; SCOUT MINI R&D Kit Pro Power On; Computing Unit Login; System Shutdown Procedure

Press the power button on the Scout MINI, as shown in the figure below.
After pressing the power button of the Scout MINI , the computing unit will automatically log in and show the following
interface, the root authority password and system login password are agx
If you need to shut down he system, do not press the power button directly because thel computing unit is running. Enter
the command $poweroff in the terminal or click shut down of the drop-down menu, as shown in the figure below, wait until
the display shows no signal input, then press the power button to shut down the system.
3.2.4.2 SCOUT MINI R&D Kit Pro
3.2.5 Computing Unit Login
3.2.6 Shut Down
15