12 Two-wheel tractor agria 3600
Mowing Implement
Handle with care! Sharp blades of the
cutter bar may cause injuries! Remove
protective knife strips only for mowing
and refit immediately after work has fin-
ished.
For transport and storage always mount
the protective knife strips. Secure fin-
ger bars additionally with tension
springs.
Do not transport the removed cutter bar
without protective strips.
When mounting and removing the cut-
ter bar, make sure all blades are pro-
tected by the knife strip.
To exchange the knife and to mount/re-
move the knife head, make sure that you
turn screws away from cutting blades.
For grinding the mowing knives, always
wear safety goggles and gloves.
Trailer
Make sure to not exceed permissible
tongue load of trailer coupling, floating
drawbar or hitch.
When coupling the drawbar, make sure
manoeuvrability at coupling point is suf-
ficient.
Do not exceed gross axle weight rating,
towing capacity and gross weights.
Before driving, check brake function and
rear lighting for proper operation.
Regularly check brake systems closely.
Have adjustments and repairs on the
brake system carried out by a profes-
sional workshop or an authorized brake
service station only.
When driving with mounted trailer, do
not use single-wheel braking.
On tractors equipped with single-wheel
transmission do not engage single-
wheel transmission. Single-wheel trans-
mission must be locked!
For tractors equipped with differential
lock; do not use differential lock when
driving in curves.
Only one passenger may ride on the
trailer, provided a safe passenger seat
is available.
No additional passengers may be car-
ried.
When driving downhill, shift into lower
gears in time. On slopes never de-clutch
to change gears.
Weights
Fit weights properly and at specified
points.
1. Safety Instructions
1
To Next Page
Loading...
