Two-wheel tractor agria 3600 31
3. Devices and Operating Elements
Coupling and Decoupling
Implements
Rear Attachments
W
Mount and remove attach-
ments only with engine
switched off!
Coupling attachments
l
Remove plastic cap from attachment
coupling pin.
l
Ensure that coupling surfaces on two-
wheel tractor and attachment are clean
and greased. Clean and grease, if nec-
essary.
ŒSet gearshift to “0”.
•For PTO driven attachments, set
PTO shifter (B/7 and (C/7) on two-wheel
tractor to position “0”.
ŽFor mounting hoeing and tilling at-
tachment:
– Push reversing lock bolt out.
•Press locking lever down and hold.
•Insert attachment up to stop shoul-
der and release locking lever.
The bolt now locks into place automati-
cally. If not, twist attachment slightly to
the left or right.
Decoupling attachments
ŒPress locking lever down and hold.
•Decouple attachment.
l
Fit protective cap on attachment cou-
pling pin.
3
•
Œ
•
•
Œ
•
"0"
"0"
Ž
To Next Page
Loading...
