Two-wheel tractor agria 3600 47
5. Maintenance
Coupling Attachments
After every 50 operating hours and each time you
clean the machine, lubricate the nipples with Bio-
lubricating grease.
Additionally, grease the PTO each time before you
couple an attachment.
Steering handle
Once per year or after after each cleaning with air-
compressed water jets, lubricate the lubricating nip-
ple (1) with Bio-lubricating grease.
Apply grease generously to leave a grease neck
around bearings to prevent water and dirt from pen-
etrating.
Brake
Always after 200 operating hours or at least once
per year, check brake jaws and brake operating
system for unhindered movement and efficiency.
Resetting is made using the bowden cable adjust-
ing screws.
è - Serviceç
5
66
66
6 50 h
66
66
6 B
To Next Page
Loading...
