50 Two-wheel tractor agria 3600
5. Maintenance
Storage
For longer periods of no operation:
a) Clean thoroughly, repair paint coat.
b) Spray all shining parts, in particular cutter bar, with Bio-
slushing oil.
c) Engine preservation
l
Drain the fuel completely from the system or fill the fuel
tank, add fuel stabilizer (agria No. 799 09) to the fuel tank
- Observe instructions.
Operate the engine for approx. 1 minute.
l
Change the engine oil.
l
Fill a teaspoon of engine oil (approx. 0.03l) into the spark
plug opening. Slowly crank the engine.
l
Reinstall the spark plug and set the valves on compres-
sion using the recoil starter (Pull the starter rope until you
feel resistance), the valves are closed.
l
Crank the engine slowly at 2–3 week intervals (spark plug
connector is removed!) and set the valves on compression
again.
d) Drive-wheels
Support drive-wheels in such a way that tyres have no ground
contact. Pneumatic tyres are quickly destroyed, if left stand-
ing under load and uninflated.
e) Storing the machine
To avoid severe corrosion:
- to preserve the machine from atmospheric influences
Do not park the machine in:
- humid rooms
- in rooms where fertilizer is stored
- in stables or adjacent rooms.
f) Protect machine
with cloth or a similar cover.
5
To Next Page
Loading...
