Two-wheel tractor agria 3600 25
Differential Gear
for version 3F2R
To improve traction in severe conditions, differential gear
can be locked. The hand lever for engaging/disengag-
ing differential lock is located on the right side of the
handlebar.
I
For drives with mounted trailer, the differential
lock should be disengaged (especially for
driving in curves) to ensure easy steering.
Keep differential gear locked only as long as it is nec-
essary.
Engaging differential lock (rigid wheel shaft)
while driving:
Œrelease throttle
•move hand lever for differential lock (C/2) forward
while pressing the throttle
Disengaging differential lock
l
move hand lever for differential lock backward
PTO
The gear independent PTO (A/12) is integrated into
the coupling flange. PTO is turned on/off via the PTO
shifter (B/7 and C/7).
Only change PTO speed when the machine is
decoupled.
I
When steering handle is swivelled 180°, PTO
shifter and gear shifter change sides and
gear change is vice versa!
3. Devices and Operating Elements
3
Œ
•
C/2
B/7; C/7
32
Reversing Lock
The reversing lock (safety bolt) prevents PTO from being engaged for hoing while
the tractor is in reverse. Also, it prevents reverse gear from being engaged while
PTO is at work.
I
For mounting the hoeing attachment,
pull safety bolt out entirely
For mounting the front attachments (e.g. mowing attachment),
push safety bolt in entirely
31
30
To Next Page
Loading...
