Two-wheel tractor agria 3600 49
5. Maintenance
General Maintenance
ΠWatch out for fuel and oil leakage every
time You take up operation, repair if necessary.
• Regularly check bolts and nuts for tight fit,
retighten, if necessary.
Ž At least once a year and after cleaning:
Lubricate all gliding and moving parts with Bio-
lubricating grease or Bio-lubricating oil (e.g.
speed hand lever, handle bearing etc.).
Cleaning
Engine
Clean engine only with a cloth. Avoid spraying
with water jets, as water might penetrate into
ignition and fuel system and cause malfunc-
tions.
Machine
After each cleaning (spraying with water, es-
pecially with air-compressed water jets) lubri-
cate all lubrication points, oil and let two-wheel
tractor run for a short time to press water out.
Apply grease generously to leave a grease ring
around bearings to prevent water, plant sap,
and dirt from penetrating.
Graphic Symbols
Worn and missing stickers with operating and
safety instructions must be replaced.
5
Ž
Œ
•
èI
To Next Page
Loading...
