Agria 3600 - Gearbox Operation (Version 3 F2 R); Fast Speed Engagement (Version 3 F2 R)

Two-wheel tractor agria 3600 23
Version 3F2R
The machine is equipped with a mechanical gearbox
with
l 3 forward and 2 reverse speeds,
l lockable differential,
l single-wheel brakes.
Changing Gears
The gears 1–2 and R1–R2 are changed via the gear
shifter (C/9).
There are neutral positions between the various gears.
The 3rd gear (“fast speed”) is activated with the en-
gagement of fast speed.
For safety reasons, engagement of fast speed is only
possible when the machine is in forward speed (rear
attachments). For mounting front attachments, remove
the fast speed shifter and block gear change.
The position of the shift lever on the shift gate indi-
cates the gear engaged.
3. Devices and Operating Elements
3
32
C/9
C/8
C/9
I
Only change gears when engine is halted (decoupled).
With the steering handle swivelled 180° (for front attachments), the
shifters for gears and PTO change sides.
Fast Speed
For version 3F2R
For transport drives the 3rd speed (fast speed) can be
engaged.
l For this purpose, mount fast speed shifter (C/8).
l Move shifter (C/9) to position “0” between 1st and
R1 gear.
l Move fast speed shifter (C/8) to position “ (fast)”
(pull gear shifter backwards).
l Move gear shifter to position “3”.
l To change down, proceed in reverse order.
l To change direction, first move gear shifter to neu-
tral and then disengage “fast speed”.
8