34 Two-wheel tractor agria 3600
Coupling Front Attachments
l
Remove plastic cap from coupling pin
on attachment.
l
Ensure that coupling surfaces on two-
wheel tractor and attachment are clean
and greased. Clean and grease, if nec-
essary.
ŒSet gearshift to “0”.
•For PTO driven attachments, set
PTO shifter on two-wheel tractor to po-
sition “0”.
ŽPress locking lever (1) down and
hold.
•Insert attachment up to stop shoul-
der and release locking lever (1).
Now the bolt locks into place automati-
cally. If not, twist attachment slightly to
the left or right.
Decoupling attachments
ŒPress locking lever (1) down and
hold.
•Decouple attachment.
l
Fit protective cap onto attachment
coupling pin.
3. Devices and Operating Elements
Ž
•
Œ
•
Œ
•
"0"
"0"
3
To Next Page
Loading...
