EasyManua.ls Logo

Agria 3600 - Fuel Hoses, Cooling, Exhaust, and Governor Maintenance

Agria 3600
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Two-wheel tractor agria 3600 45
Fuel Hoses
Exchange after every 2 years, Exchange leaking fuel
hoses immediately.
Cleaning the Cooling System
Clogging of dirt and dust may occur to the cooling
system. This may heat up and damage the engine.
ŒRegulary check the cooling-air screen (E/6) and
clean from dust and sucked-in plant trash.
Remove the fan case at least once a year, pref-
erably before the season starts and clean the cool-
ing fins on cylinder, cylinder head, guide plates and
cooling-air screen, both serving for good air circula-
tion.
è
- Serviceç
Exhaust
Regularly clean surrounding parts of muffler (D/5)
Free from grass, dirt and inflammable deposits.
Otherwise danger of fire results!
Check each time before you take up operation. Re-
place any damaged silencers.
Caution with hot engine parts!
The exhaust and other engine parts become very
hot, if the engine runs and immediately after turning
off. Hold for sufficient distance from hot surfaces and
keep children away from the running engine.
Governor
For proper function of the engine speed governor
and to adjust the upper idling speed, the governor
spring has to be in the appropriate hole, see fig.
W
Any changes to the position of the spring
increases the risk of accident and will render
the warranty null and void!
Keep governor spring, lever and linkages free from
dirt and plant trash at all times.
5. Maintenance
5
Governor spring
in hole 2
6 J
6 A
6 A; 5 h
Œ
All further maintenance at the engine see engine operating instructions.

Related product manuals