Please follow my guide to learn how to quickly set up and use your new equipment HS2. You must really want to use it to communicate. Below we will
guide you to the first QSO. You will get an unparalleled experience from this brand new device. Now, we begin to understand how to operate it!
●Turn on and off HS2
1. To turn on the radio, simply long-press the power button for one second.
2. To turn off the radio, simply long-press the power button for one second.
●Frequency band selection
1. The frequency range of HS2 is very wide. Short press【Band】to bring up the frequency band menu
2. Short press the arrow keys to select, short press【Menu】to confirm the frequency band.
●Frequency selection
1. Short press the left and right direction keys to select the cursor position, short press the up direction key to adjust the required frequency, and long-press
the up and down direction keys to quickly select the required frequency.
2. Input the required frequency by the direct numeric keyboard.
For example: if you want to enter 14.270MHz, press the numeric keyboard: 014270000 or 14.270000, and then press the menu key【Menu】to confirm.
●Mode selection
1. The whole HS2 supports LSB, USB, CW, AM, FM. Short press【Mode】key to select, LSB and USB need to long press【Mode】key to switch, CW and
CWR long press【Mode】key to switch.
●Transmit power selection
1. Short press【PA】to enter the transmit power adjustment and use the up and down direction keys to adjust the value.
To Next Page
Loading...