Ailunce HS2 - Third-Party Software Integration; JTDX Software Setup

Ailunce HS2 HF/VHF/UHF Full Mode SDR Transceiver
Back Homepage
29
Computer third-party software setting operation
1, JTDX setting
1-1. The computer operating system only supports WIN10. Please
use the TYPE-C USB cable to connect to the computer radio. After
a successful connection, enter the computer device manager. You
can view the port (USB serial device COM*). Here I display
COM4.
1-2. Set the USB mode on the radio terminal, long-press the
【
RF
】
key to enter the USB sound
card data output format selection interface, use the up and down keys to select the output mode
【
DIGI
】
, and then long press to exit.