Aim MIL-STD-1553 - Page 477

MIL-STD-1553 Reference Manual
463
Appendix A – Document/Software History
Version
General or S/W Function
Change
Description
ApiCmdSrvReqVecStatus
Changed description for parameter ‘uw_Xferid’
ApiCmdSysGetMemPartition
Added
ApiCmdSysSetMemPartition
Added
ApiCmdTrackDef
Added
ApiCmdTrackRead
Added
ApiInit
Extended description for Return Value
ApiInstIntHandler
Changed description for parameter ‘ul_Lla’
Changed description for parameter ‘ul_Llc’
ApiReadBlockMemData
Changed purpose
Extended description for parameter ‘memtype’
Changed description for parameter ‘offset’
Added parameter ‘pul_BytesRead’
ApiReadMemData
Changed purpose section
Extended description for parameter ‘memtype’
Changed description for parameter ‘offset’
ApiWriteBlockMemData
Changed purpose section
Extended description for parameter ‘memtype’
Changed description for parameter ‘offset’
Added parameter ‘pul_bytesRead’
ApiWriteMemData
Changed purpose section
Extended description for parameter ‘memtype’
Changed description for parameter ‘offset’
ApiWriteRepData
Changed description for parameter ‘size’ function
Header Files/
Compiler Preprocessor
Definitions
Changed name of Ai1553i_cdef.h to Ai_cdef.h
Required include files now only Ai1553i_def.h
Changes to header files modified names of preprocessor
definitions required. See the associated Programmer’s
Guide.
V18.1x
Rev.A
Incorporated BSP 0710
ApiCmdTrackDef
Extended range for parameter “uc_Trackid
ApiCmdTrackRead
Extended range for parameter “uc_Trackid
V19.0x
Rev.A
Incorporated BSP 0800
ApiCmdBCStatusRead
ApiCmdBCAcycPrep
ApiCmdRTStatusRead
ApiCmdBMStatusRead
ApiCmdBMStackpRead
ApiCmdBMStackEntryFind
ApiCmdBMTCBIni
Added description for “padding” variables
V19.0x
Rev B
General
Corrected phone number
Changed page I to a common layout
V19.0x
Rev C
General
Small corrections