Aim MIL-STD-1553 - Page 481

MIL-STD-1553 Reference Manual
467
Appendix A – Document/Software History
Version
General or S/W Function
Change
Description
V19.6x
Revision
C
General
Unify names of products
V20.0x
Revision
A
General
AIM internal version
V21.0x
Revision
A
General
- Corrected document history (dates 1/2003 and 3/11/2003
were wrong, should be 2004)
- Adapted chapter “2. C Header Files”
- Adapted chapter “1.3.3.1 Function Call Documentation
Conventions for parameters ‘ul_ModuleHandle’ and ‘biu’”
- Added chapter “1.3.4 Function Calling Convention”
- Added availability table for each function
- Corrected chapter 13.2
- Corrected table 1.3.5-I “Transfer ID/ Buffer Header ID
Ranges”
- Added table 1.3.5-II “Buffer ID Ranges”
- Corrected table 9-I “Remote Terminal Function Description”
(ApiCmdRTSAMsgRead occurred twice)
- Renamed “section” in heading lines to “chapter”
- Extended chapter 10.1.12.1 “Message Filter Recording
Formats” with new Format 4 (chapter 10.1.12.1.5)
INCOMPATIBILITY
All functions
(except the newly added and
ApiOpen)
Renamed parameter ‘bModule’ to ‘ul_ModuleHandle’
Changed type of parameter ‘ul_ModuleHandle’ from AiUInt8
to AiUInt32
ApiConnectToServer
ApiDelIntHandler
ApiDisconnectFromServer
ApiGetServerInfo
ApiInstIntHandler
ApiPrintfOnServer
ApiSetDllDbgLevel
ApiCmdInitDiscretes
ApiCmdReadDiscretes
ApiCmdWriteDiscretes
Removed restriction note that it was only applicable for
special board types
ApiBHModify
Corrected purpose section (‘address’ was spelled with one ‘d’
only)
Extended description for ‘ul_CurrentBufferIndex’
ApiConnectToServer
Removed note that the number of network connections was
restricted to one.
INCOMPATIBILITY
ApiDelIntHandler
Added description for parameter ‘biu’
ApiGetBoardInfo
Added
INCOMPATIBILITY
ApiInstIntHandler
Added description for parameter ‘biu’
Extended 467ehavior467on for parameter ‘uc_Biu’
Changed structure element ‘ul_Lld’ to ‘x_Lld’ and extended
its description