Aim MIL-STD-1553 - Page 482

MIL-STD-1553 Reference Manual
468
Appendix A – Document/Software History
Version
General or S/W Function
Change
Description
INCOMPATIBILITY
ApiOpen
Renamed parameter ‘bModuleHandle’ to ‘pul_ModuleHandle’
Changed type of “pul_ModuleHandle” to “AiUInt32 *”
Extended description for parameter ‘bModule’
Added “obsolete” note
ApiOpenEx
Added (replaces former ApiOpen and is also needed to
access second stream of dual 3910 boards)
ApiReadBSPVersionEx
Added new output parameter ‘x_CoreLcaBiu1Ver’
Added new output parameter ‘x_CoreLcaBiu3Ver’
Added new output parameter ‘x_EndDecLcaBiu4Ver’
Added new output parameter ‘x_IoLcaBiu3Ver’
Added new output parameter ‘x_IoLcaBiu4Ver’
Added new output parameter ‘x_FirmwareBiu3Ver’
Added new output parameter ‘x_FirmwareBiu4Ver’
Added new output parameter ‘x_MonitorVer’
Extended description for parameter ‘puc_BspCompatibility’
ApiReadMemData
ApiReadBlockMemData
ApiWriteMemData
ApiBlockWriteMemData
Added two notes for parameter ‘memtype’
ApiSetDllDbgLevel
Added new debug mode DBG_INFO
Added new debug mode DBG_PARAMCHK
Added new debug mode DBG_TRACE
Added new debug mode DBG_TRACE_PBAPRO
Extended note for parameter ‘ul_DllDbgLevel’
ApiCmdBite
Added note for parameter ‘sc’
ApiCmdBCAcycPrep
Added ‘padding1’ to structure ‘pacyc’
ApiCmdBCBHDef
Changed description for parameter ‘bid’
Extended description for parameter ‘sqm’
Corrected “Return Value” section
ApiCmdBCGetXferDef
Two notes added for parameter ‘rte’ (toggle bus)
Corrected description of structure ‘TY_API_BC_ERR’
Extended description for parameter ‘contig’
ApiCmdBCIni
Note added for parameter ‘tbm’, note modified for parameter
‘gsb’ (transfer bus mode)
ApiCmdBCMFrameDefEx
Function description added (was not documented)
ApiCmdBCStatusRead
Added ‘padding1’ to structure ‘pdsp’
ApiCmdBCStart
Note added for parameter ‘smod’ (continue BC)
ApiCmdBCInstrTblGen
Added description for parameter ‘laddr’
Extended parameter ‘mode’ with values 4 and 5
Extended description for parameter ‘dest_offset’
Extended parameter ‘op’ with value 0x11
(API_BC_FWI_EFEX_XFER)
Extended parameter ‘par1/par2’ with value 0x11
(API_BC_FWI_EFEX_XFER) and
extended
description for API_BC_FWI_XFER
ApiCmdBCXferDef
Corrected description of structure ‘TY_API_BC_ERR’
Extended description for parameter ‘contig’