MIL-STD-1553 Reference Manual
Appendix A – Document/Software History
General or S/W Function
Change
Extended description for parameter ‘ul_RxSa’
Extended description for parameter ‘ul_TxSa’
Extended description for parameter ‘ul_RxMC’
Extended description for parameter ‘ul_TxMC’
Extended description for parameter ‘ul_HSRxMID[8]’
Extended description for parameter ‘ul_HSTxMID[8]’
Extended description for parameter ‘ul_HSMC’
Note added for parameter resp_time (500KHz)
Extended description for parameter ‘contig’
Added ‘padding1’ and ‘padding2’ to structure ‘pdsp’
Corrected description for parameter ‘irig_src’
Corrected purpose (removed note)
Corrected description for parameters ‘ul_BcHipInstr’,
‘ul_BcLipInstr’,’ul_BcAcycInstr’
Extended structure arrays ‘x_BiuAddr’, ‘x_BiuSize’ and
‘x_BiuCnt’ from 2 to 8
Extended structure ‘x_Sim’ to an array of dimension 2
Extended/Renamed variable ‘ul_GlobalMemSize’ to
‘aul_GlobalMemSize[2]’
Added new structure array ‘x_BiuInfo[8]’
Parameter ‘uc_Mode’ was described as ‘mode’
Corrected description for parameters ‘ul_BcHipInstr’,
‘ul_BcLipInstr’,’ul_BcAcycInstr’
Extended description with parameter ‘ax_BiuSize’
Extended structure arrays ‘x_BiuSize’ and ‘x_BiuCnt’ from 2
to 8
Added new structure element ‘aul_SimBufSize[2]’
Changed parameter ‘pul_MemUsed’ to ‘aul_MemUsed[2]’
Extended range of parameter ‘id’
from 1..32 to 1..255
Extended range of parameter ‘id’
from 1..32 to 1..255
Corrected spelling of parameter ‘uw_ContinuousTrackNb’ in
prototype
Extended / corrected description for parameters ‘uc_BT’,
‘uc_XidRtSa’ and ‘uw_MultiplexedTrackNb’
Extended range of parameter ‘uc_TrackId’
from 0..31 to 0..63
Extended range of parameter ‘uw_MultiplexedTrackNb’
from 2..1024 to 0, 2..65536
Extended purpose
Extended “uc_DataValid” with flag “NOMEM”
Extended range of parameter ‘uc_TrackId’
from 0..31 to 0..63
Extended range of parameter ‘uw_MultiplexedTrackIndex’
from 1..1024 to 0..65535
value for ‘read all multiplexed tracks’
To Next Page
Loading...
