Aiphone GT SYSTEM User Manual

- 10 -
2
COMPONENTS
Entrance Station (Unit type)2-1
Panel Module
Speech module panel
(guidance-enabled type) GT-DP-L
Speech module (guidance-enabled
type)
GT-DA-L (connector included)
Speech module panel
GT-DP
Speech module
GT-DA
(connector included)
Camera module panel
GT-VP
Camera module
GT-VA
(connector included)
1-call button panel
GF-1P
2-call button panel
GF-2P
Switch module
GT-SW
(connector, name card included)
3-call button panel
GF-3P
4-call button panel
GF-4P
Name scrolling module
(VIGIK-linked type)
GT-NS-V (connector included)
Name scrolling module panel
GT-NSP-L
Name scrolling module
GT-NS
USB cable A-B type (1 m)
(GT-NS-V, GT-NS included)
10 key module panel
GF-10KP
10 key module
GT-10K
Access control keypad module with panel
GT-AC
Address module panel
GF-AP
Blank panel
GF-BP
Address module
GT-AD
(address card, address cover included)

Aiphone GT SYSTEM Specifications

General

Wiring	2-wire
Door Release	Yes
Operating Voltage	24V DC
Wire Gauge	18 AWG
Type	Intercom System
Power Source	24V DC
Installation	Surface-mounted
Communication	Hands-free
Expandability	Expandable to multiple door stations and master stations
Mounting	Wall-mount
Operating Temperature	14°F to 140°F (-10°C to 60°C)
Humidity Range	10% to 90% (non-condensing)
Frequency Response	300 Hz to 3.4 kHz
Maximum Stations	500
Maximum Door Stations	32 door stations