If the LED X (Fault) of the keypad is not actuated after installation in SmartBracket, check the status of the tamper in
the Ajax Security System application and then the fixing tightness of the panel.
If the keypad is torn off from the surface or removed from the attachment panel, you will receive the notification.
Keypad Maintenance and Battery Replacement
Check the Keypad operating capability on a regular basis.
The battery installed in the keypad ensures up to 2 years of autonomous operation (with the inquiry frequency by the
hub of 3 minutes). If the Keypad battery is low, the security system will send the relevant notices, and
the “Fault” indicator will smoothly lights up and goes out after each successful password entry.
Battery Replacement
Complete Set
1. KeyPad
2. SmartBracket mounting panel
3. Batteries AAA (pre-installed) – 4 pcs
To Next Page
Loading...
Need help?
General
