1. QR code with the device registration key.
2. Batteries contacts.
3. LED indicator.
4. ON/OFF button.
5. Terminals for detector power supply, alarm and tamper signals.
Operation procedure
The Transmitter serves for connecting the external alarm sources to Ajax system: indoor and outdoor detectors
tracking motion, opening, vibrations, breaks, fire, gas, leakage, etc. Compatible with detectors with NC/NO contacts.
Transmitter receives information about alarms and the activation of the external detector tamper button through the
terminals. A separate pair of terminals ensures power supply to the external detector from the module batteries with
3.3 V.
Connecting to the hub
To Next Page
Loading...
Need help?
General
