The tests do not start straight away but within a period of 36 seconds when using the standard settings. The test time
start depends on the settings of the devices scanning period (the paragraph on “Jeweller” settings in hub settings).
Volume Level Test
Signal Strength Test
Attenuation Test
Installing the Siren
Location of the HomeSiren determines its remoteness from the hub and presence of any obstacles between the
devices, hindering the radio signal and sound transmission: walls, inserted floors, large-size objects located within
the room.
Check the signal level at the installation location.
The communication range is up to 2000 meters if there are no obstacles. Please consider it when choosing an
installation place for HomeSiren.
If the signal level is one division, we cannot guarantee stable operation of the security system. Take possible
measures to improve the quality of the signal! As a minimum, move the device – even 20 cm shift can significantly
improve the quality of reception.
To Next Page
Loading...
Need help?
General
