Temperature protection — the contact will be opened when the threshold temperature of 85°С is reached inside
the Relay.
Indication
The Relay light indicator may light up green depending on the device status.
The green LED of Relay will blink intermittently if it is not assigned to the hub. When the functional button is pressed,
the green LED lights up.
Functionality Testing
The Ajax security system allows conducting tests for checking the functionality of connected devices.
The tests do not start straight away but within a period of 36 seconds when using the standard settings. The test time
start depends on the settings of the detector scanning period (the paragraph on “Jeweller” settings in hub settings).
Signal Strength Test
To Next Page
Loading...
Need help?
General
