Clean the detector body from dust, spider webs and other contaminants as they appear. Use soft dry napkin suitable
for equipment maintenance.
Do not use any substances containing alcohol, acetone, gasoline and other active solvents for cleaning the detector.
Wipe the lens very carefully and gently – any scratches on the plastic may cause reduction of the detector sensitivity.
The pre-installed battery ensures up to 7 years (MotionProtect Plus up to 5 years) of autonomous operation (with
the inquiry frequency by the hub of 3 minutes). If the detector battery is discharged, the security system will send
respective notices and the LED will smoothly lights up and goes out, if the detector detects any motion or if the
tamper is actuated.
Battery Replacement
Tech specs
To Next Page
Loading...
Need help?
General
