Socket Operating Principle
Socket turns on/off 230 V power supply according to the scenarios or at user command via the Ajax Security System
application.
Socket is furnished with a protection system against voltage variation beyond the range of 184 – 253 V or over-
current protection above 11А. In this case, power supply is interrupted, resuming after normalization of the voltage
and current values.
Maximum resistive load — 2.5 kW. In the case of inductive or capacitive loads, the maximum current is reduced to 8 A at 230 V AC!
You may view the consumed power of the electrical appliances connected via Socket through the application. There
is a consumed electricity meter.
Under insignificant loads (below 25 W), inaccurate current and power consumption readings may be displayed due to hardware limitations.
Connecting to the hub
Before starting connection:
To Next Page
Loading...
Need help?
General
