Installation of the Device
When choosing an installation place for the Socket, please consider the device remoteness from the hub and
presence of objects that may obstruct the RF signal.
Do not install the device near sources of magnetic fields (magnets, magnetized objects, wireless chargers, etc.) and inside rooms with temperature
and humidity outside the permissible limits!
To check the quality of the communication with the hub, test the signal strength in the Ajax Security System
application for at least one minute.
If the device has a low or unstable signal strength, use a radio signal range extender ReX.
The Socket is designed to connect to a European two-pin socket (Schuko type F).
Maintenance
The device does not require maintenance.
Tech specs
To Next Page
Loading...
Need help?
General
