AJAX Hub - Page 191

Room
Selecting the virtual room to which the device is assigned
Relay mode
Choosing the relay operation mode
• Pulse
• Bistable
Contact state
Normal contact state
• Normally closed
• Normally open
Pulse duration, sec
Selecting the pulse duration in the pulse mode (from 0.5 to 15
seconds)
Scenarios
Opens the menu for creating and configuring scenarios
Jeweller Signal Strength Test
Switches the relay to the signal strength test mode
User Manual
Opens the Relay Manual
Unpair Device
Disconnects the relay from the hub and deletes its settings
Voltage protection — the contact will be opened when the voltage falls outside the limits of 6.5–36.5 V.