• Arm the system — press the button (O) once
• Arm the system in the night mode — press the button (c) once
• Disarm the system — press the button (C) once
• Switch on an alarm — press the button (!) once
To disconnect the actuated security system (siren), press the disarming mode (C) on the key fob.
Operational Indication
Depending on the firmware version, the SpaceControl key fob LEDs indicate the status with red or green light.
The key fob reports its status only after any button is pressed.
The LEDs next to the pressed button quickly blink green 4 times
when a key fob with firmware version 3.16 and lower is used
The command has not been delivered as the security system is
too far away and cannot receive the command