2. Upper light indicator and masking sensor
3. Upper motion sensor lens
4. Varnish masking sensor
5. Lower light indicator and masking sensor
6. Lower motion sensor lens
7. SmartBracket attachment panel (perforated part is required for actuating the tamper button in case of any attempt to
dismantle the detector)
8. The hole for attaching SmartBracket panel with a screw
9. “On” button
10. Tamper button
11. QR Code
12. Connector for external power supply cable outlet
13. Scrollbar for adjusting the motion detection range
Operating Principle
To Next Page
Loading...
Need help?
General
