Temperature of the Detector. Measured on the processor and
changes gradually
Signal strength between the hub and the detector
Connection status between the hub and the detector
Battery level of the detector, displayed in increments of 25%
The tamper mode of the detector, which reacts to the detachment
of or damage to the body
Delay period after the security system is armed
Displays the status of using the ReX range extender
Displays the status of using the external power supply
Sensitivity level of the motion detector: low, normal, high
Has the anti-masking option been enabled
When turned on, the motion detector always detects movement
Detector firmware version
To Next Page
Loading...
Need help?
General
