Selecting the virtual room to which the device is assigned
If active, power supply will be switched off if the strength of
current exceeds 11A, in the inactive state the threshold is 16 A (or
13 A, if continues for 5 seconds)
If active, power supply will be switched off in case of a voltage
surge beyond the range of 184 – 253 V
The LED border shows the load level by means of color.
Opens the menu for creating and configuring scenarios
Jeweller Signal Strength Test
Jeweller Signal Strength Test
Switches the device to the signal strength test mode
Opens the Socket User Guide
Disconnects the device from the hub and deletes its settings
To Next Page
Loading...
Need help?
General
