AJAX Hub User Manual

Setting
Value
First field
Device name, can be edited
Room
Selecting the virtual room to which the device is assigned
Alarm Volume
Volume level in case of alarm: Very Loud, Loud, Quiet
Alarm Duration
The setting determines how long the siren sounds, if the alarm is
activated (from 3 to 180 seconds per each actuation)
Armed mode indication
If active, the siren LED blinks once every 3 seconds when the
security system is armed
Beep when arming/disarming
If active, the siren warns about the activation and deactivation of
the guard mode by the LED and a short sound signal
Beep on delay
If active, siren will beep delays (available in devices
with firmware version 3.50 and later)
Volume test
Start a volume test of the siren
Signal Strength Test
Switches the device to the signal strength test mode
Attenuation Test
Switches the siren to the signal fade test mode (available in
devices with firmware version 3.50 and later)
User Manual
Opens the siren User Manual
Unpair Device
Disconnects the siren from the hub and deletes its settings

AJAX Hub Specifications

General

Brand	AJAX
Model	Hub
Category	Switch
Language	English