AJAX Hub User Manual

Delays in night mode
Delay turned on when using night mode
Alert if moved
The accelerometer turning on the Transmitter to provide an
alarm in the event of device movement
Power supply of the external detector
Turning the power on in 3.3 V external detector:
• Disabled if hub is disarmed
• Always disabled
• Always active
Arm in night mode
If active, the device will switch to armed mode when using night
mode
Activate the siren if an alarm is detected
If active, HomeSiren and StreetSiren actuate if an alarm is
detected
Signal Strength Test
Switches the device to the signal strength test mode
Attenuation Test
Switches the device to the signal fade test mode (available in
detectors with firmware version 3.50 and later)
User Guide
Opens the device User Guide
Unpair Device
Disconnects the device from the hub and deletes its settings
Set the following parameters in the Transmitter settings:
• The state of the external detector contact, which can be normally closed or normally open.
• The type (mode) of the external detector that can be bistable or pulse.

AJAX Hub Specifications

General

Brand	AJAX
Model	Hub
Category	Switch
Language	English