If, after moving, the device still has a low or unstable signal strength, use the ReX radio signal range extender.
The detector is located either inside or outside of the door case (window frame):
When installing the detector in the perpendicular planes (inside the case/frame), use the small magnet. The distance
between the magnet and detector should not exceed 1 cm.
When positioning the parts of DoorProtect in the same plane, use the big magnet. Its actuation threshold — 2 cm.
Attach the magnet to the moving part of the door (window) to the right of the detector. If necessary, the detector may
be overturned or positioned horizontally.
To Next Page
Loading...
Need help?
General
