smartphone is similar to using a personal or general code on the keypad.
The system users can see whether the arming is started or incomplete on the
keypad display. If the group mode is activated, the colour of the group buttons
depends on the current state:
Managing scenarios with the keypad
KeyPad TouchScreen allows you to create up to six scenarios to control one or a
group of automation devices.
To create a scenario:
Learn more
Grey — disarmed, arming process not started.
Green — arming process started.
Yellow — arming is incomplete.
White — armed.
1. Open the . Select the hub with at least one KeyPad TouchScreen
and . Add one if necessary.
Ajax app
automation device
2. Go to the Devices tab.
3. Select KeyPad TouchScreen from the list and go to the Settings menu.
4. Go to the Automation Scenarios menu. Enable the Scenarios Management
toggle.
5. Open the Keypad Scenarios menu.
6. Press Add Scenario.
7. Select one or more automation devices. Press Next.
8. Enter the scenario name in the Name eld.
9. Select device action during the scenario performance.
10. Press Save.
To Next Page
Loading...
Need help?
General
