Created scenarios are displayed in the app: KeyPad TouchScreen → Settings →
Automation Scenarios → Keypad Scenarios. You can turn them off, adjust
settings, or delete them at any time.
To remove a scenario:
The user can see and manage automation scenarios after authentication when
the Pre-authorization feature is enabled. Go to the Scenarios tab, enter the code
or bring a personal access device to the keypad.
To perform a scenario, press an appropriate button in the Scenarios tab.
The KeyPad TouchScreen display shows only activated scenarios in the keypad settings.
Fire alarm muting
Chapter in progress
Indication
KeyPad TouchScreen informs users about alarms, entry/exit delays, current
security mode, malfunctions and other system states with:
11. Press Back to return to the Automation Scenarios menu.
12. If necessary, activate the Pre-authorization toggle.
1. Go to the Settings of KeyPad TouchScreen.
2. Open Automation Scenarios → Keypad Scenarios menu.
3. Select the scenario you want to remove.
4. Press Next.
5. Press Delete Scenario.
display;
To Next Page
Loading...
Need help?
General
