DD8
plus
Version 2.20 - September, 1998 i
WARNING
WARNING: WHEN USING ELECTRIC PRODUCTS, BASIC PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED, INCLUDING THE FOLLOWING:
WARNING
Power requirements for electrical equipment vary from area to area. Please ensure that your
DD8
plus
meets the power requirements in your area. If in doubt, consult a qualified electrician
or AKAI professional dealer.
120 VAC @ 60 Hz for USA and Canada
220~240 VAC @ 50 Hz for Europe
PROTECTING YOURSELF AND THE DD8
plus
• Never touch the AC plug with wet hands.
• Always disconnect the DD8
plus
from the power supply by pulling on the plug, not the cord.
• Allow only an AKAI professional dealer or qualified professional engineer to repair or reassemble
the DD8
plus
. Apart from voiding the warranty, unauthorized engineers might touch live internal
parts and receive a serious electrical shock.
• Do not put, or allow anyone to put any object, especially metal objects, into the DD8
plus
.
• Use only a household AC power supply. Never use a DC power supply.
• If water or any other liquid is spilled into or onto the DD8
plus
, disconnect the power, and call your
dealer.
• Make sure that the unit is well-ventilated, and away from direct sunlight.
• To avoid damage to internal circuitry, as well as the external finish, keep the DD8
plus
away from
sources of direct heat (stoves, radiators, etc.).
• Avoid using aerosol insecticides, etc. near the DD8
plus
. They may damage the surface, and
may ignite.
• Do not use denaturated alcohol, thinner or similar chemicals to clean the DD8
plus
. They will
damage the finish.
• Modification of this equipment is dangerous, and can result in the functions of the DD8
plus
being
impaired. Never attempt to modify the equipment in any way.
• Make sure that the DD8
plus
is always well-supported when in use (in a specially-designed
equipment rack).
• When installing the DD8
plus
in a 19" rack system, always allow 1U of ventilated free space
above it to allow for cooling. Make sure that the back of the rack is unobstructed to allow a clear
airflow.
• In order to assure optimum performance of your DD8
plus
, select the setup location carefully,
and make sure the equipment is used properly. Avoid setting up the DD8
plus
in the following
locations:
1. In a humid or dusty environment
2. In a room with poor ventilation
3. In any situation where the unit is not horizontal
4. Inside a vehicle such as a car, where it will be subject to vibration
5. In an extremely hot or cold environment
To Next Page
Loading...