Page 26 DD8
plus
Version 2.20 - September 1998
Pressing UTILITIES (F3/F4) goes to the UTILITIES page
(see below)
where you can select
various disk functions such as backup and copy.
Pressing NEW (F5) goes to the NEW PROJECT page where you can create a new project.
Pressing LOAD (F6) loads the Project currently selected by the highlighted cursor. After a project
is loaded, the DD8 goes directly to the PLAY mode. If the Project has been saved with SYNC
enabled, the DD8 will set itself into CHASE mode (waiting for external time source)
DISK PAGES - 7
To Next Page
Loading...