Page 77DD8
plus
Version 2.20 - September 1998
RECORDING 1
RECORDING 2
RECORDING 1
The area marked
from RECORDING 1 will be deleted to
recover disk space.
First Recording:
Second Recording:
NOTE: There are certain considerations regarding destructive recording that you should be
aware of.
• THERE IS NO UNDO FOR RECORDINGS WHEN DESTRUCTIVE MODE IS USED.
• After you have just loaded a new project, as a safety factor, recording over cues in that
project will not delete their audio from disk and the original project cannot be damaged.
If, however, you record over cues recorded since the project was loaded, newly recorded
cues’ audio will be deleted from disk.
The destructive record mode will go some way to avoiding the build up of
unnecessary audio on your disk but, given the above points, there may
be times when you will need to perform a manual cleanup or minimise.
SYSTEM - 8
To Next Page
Loading...