I. TECHNICAL DATA
1.
MODEL
AP-206jC
TURNTABLE
314 mm aluminum alloy die-cast
DRIVE SYSTEM Direct drive, Auto-return
J-
MOTOR DC Servo Motor
SPEED
&
PITCH CONTROL 33-1/3 and 45 rpm ±2.5%
SPEED ACCURACY 1,000 Hz ±0.15%
WOW AND FLUTTER 0.035% (DIN), 0.025% (JIS)
RUMBLE
Better than 49 dB (DIN A), 70 dB (DIN B)
TONE ARM
Static-balanced type with Anti-skating Adjuster
ARM LENGTH
220 mm
STYLUS PRESSURE ADJUSTMENT RANGE
o
to 3 grams
APPLICABLE CARTRIDGE WEIGHT 4 to 12 grams
ARM LIFTER
Oil-damped
OVERHANG
15 mm
OFFSET ANGLE
22°30'
HORIZONTAL TRACKING ERROR ANGLE
±2°
SHELL WEIGHT
7.8 grams
CARTRIDGE
(AP-206C only:
Model AP-206 does not include cartridge) Induced
magnet type
CARTRIDGE WEIGHT
6.4 grams
FREQUENCY RESPONSE 25 Hz to 30,000 Hz
OUTPUT VOLTAGE 5 mV
CHANNEL SEPARATION More than 23 dB
OPTIMAL STYLUS PRESSURE
2 grams
DYNAMIC COMPLIANCE
8 x 10-
6
cm/dyn vertical
8 x 10-
6
cm/dyn horizontal
POWER REQUIREMENTS' 120V, 60 Hz for U.S.A. and Canada
220V, 50 Hz for European countries except U.K.
240V, 50 Hz for U.K. and Australia
1'10 to 120V, 220 to 240V switchable 50/60 Hz for other countries
DIMENSIONS
440(W) x 158(H) x 350(D) mm
WEIGHT
7.4 kg
STANDARD ACCESSORIES
45 rpm Adapter .
Minus driver ....
Operator's Manual
1
1
1
*
For improvement purposes, specifications and design are
subject to change without notice.
4
To Next Page
Loading...
