Do you have a question about the Akai GXC-710D and is the answer not in the manual?
Stops tape travel automatically at the end of the tape, protecting the tape.
Instructions for cleaning tape heads and pinch wheel to maintain sound quality.
| Track System | 4-track, 2-channel stereo |
|---|---|
| Tape Speed | 4.76 cm/s |
| Type | Stereo tape deck |
| Heads | 1 x playback, 1 x erase |
| Motor | DC servo motor |
| Tape Type | Normal, CrO2, FeCr |
| Signal-to-Noise Ratio | 58dB (dolby B) |
| Wow and Flutter | 0.05% (WRMS) |
| Input | Line input |
| Output | Line output |
| Input Sensitivity | Line: 100mV, Mic: 3mV |
| Power Supply | 220V, 50Hz |
| Output Level | 775mV |
Loading...