Akuvox A01 Admin Guide

A01 Access Control Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
9
8.1.2. Upload Open Door Tone
You can upload the Open-Door Tone on the device web interface.To
configure the configuration on web Hardware > Audio > Open Door Tone
Setting interface.
9.Network Setting
You can configure the default DHCP mode (Dynamic Host Configuration
Protocol) and static IP connection. Moreover, you can set up IP address,
Subnet Mask, Default Gateway, LAN DNS1 & LAN DNS2. To configure the
configuration on web System > Network > LAN Port interface.
Parameter Set-up:
 DHCP: select the DHCP mode by checking off the DHCP box. DHCP mode
is the default network connection. If the DHCP mode is selected, then the
access control terminal will be assigned by the DHCP server with IP
address, subnet mask, default gateway, and DNS server address
automatically.
 Static IP: select the static IP mode by checking off the Static IP check
box. When static IP mode is selected, then the IP address, subnet mask,
default gateway, and DNS servers address must be manually configured
according to your actual network environment.
 IP Address: set up the IP Address if the static IP mode is selected.

Akuvox A01 Specifications

General

Brand	Akuvox
Model	A01
Category	IP Access Controllers
Language	English