Akuvox A01 Admin Guide

A01 Access Control Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
21
Parameter Set-up:
 Enabled: click the checkbox to enable the public pin code.
 PIN Code: input the public pin code.(The code should contain 2-8 digits.)
12.2. Access Authentication Mode
12.2.1. Access Authentication Mode Configuration
A02 supports dual access authentication mode. You can set up the dual
access authentication mode on Hardware > Relay> Access Authentication
Mode interface.
Parameter Set-up:
 Authentication Mode: “Any Method” indicates RF card or PIN code.”RF
Card+PIN” means swiping the card first then input the PIN code. “PIN+RF
Card” means input the PIN code, then swipe the card.
12.2.2. Dual Authentication Interval
You can set up the interval time for dual access authentication on
Hardware > Keypad > Basic interface.

Akuvox A01 Specifications

General

Brand	Akuvox
Model	A01
Category	IP Access Controllers
Language	English