Akuvox A01 Admin Guide

A01 Access Control Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
23
 Enable: tick the check box to enable the tamper alarm function. When the
tamper alarm goes off, you can press the Disarm tab beside the check
box to clear the alarm.
 Key Status: temper alarm will not be triggered unless the key status is
shifted from “Low” to “High” status.
Note:
 Disarm tab will turn gray when the temper alarm is cleared.
 The round rubber button at the back of the device must be in
press-down status otherwise the alarm will not be fired.
13.2.Security Notification Setting
13.2.1.Email Notification Setting
If you want to receive the security notification via email, you can configure
the Email notification on the web interface properly. To configure the
configuration on web Services > Action > Email Notification interface.

Akuvox A01 Specifications

General

Brand	Akuvox
Model	A01
Category	IP Access Controllers
Language	English