Akuvox A01 Admin Guide

A01 Access Control Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
12
Parameter Set-up:
 Type: select among three options Disabled, WebRelay and Both. Select
WebRelay to enable the web relay. Select Disable to disable the web relay.
Select Both to enable both local relay and web relay.
 IP Address: enter the web relay IP address provided by the web relay
manufacturer.
 User Name: enter the User name provided by the web relay manufacturer.
 Password: enter the password provided by the web relay manufacturer.
The password is authenticated via HTTP and you can define the
passwords using “http get” in Action.
 Web Relay Action: enter the specific web relay action command provided
by the web manufacturer for different actions by the web relay.
http://admin:admin@192.168.1.2/state.xml?relayState=2.
After the web relay is set up, you can configure the specific web relay to be
triggered based on the relay location for the door access. To configure the
configuration on web Directory > User > Access Setting interface. You need
to click +Add tab to turn to Access Setting interface.

Akuvox A01 Specifications

General

Brand	Akuvox
Model	A01
Category	IP Access Controllers
Language	English