Akuvox A03S User Manual

A03S Access Control Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
6
6.Time Setting
Time setting on the web interface allows you to set up time and date
manually while allowing you to use NTP server address that you obtained to
automatically synchronize your time and date. And when your time zone is
selected, the device will automatically notify the NTP server of its time zone
so that the NTP server can synchronize the time zone setting in your device.
To configure the configuration on the device web System > Time interface.
Parameter Set-up:
 Time Zone: select the specific time zone depending on where the device
is used and then press Confirm tab for the confirmation. The default time
zone is GMT+0.00.
 Primary Server: enter the primary NTP server you obtained in the NTP
Server field.
 Alternate Server: enter the secondary NTP server you obtained in the NTP
Server field to be used as a backup.
 Update Interval: set the automatic time update via NTP server.
Note:
 When the check box is unticked, the parameters related to NTP
server will become not editable.

Akuvox A03S Specifications

General

Brand	Akuvox
Model	A03S
Category	IP Access Controllers
Language	English