A03S Access Control Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
18.2. Configuration Files for Auto-provisioning
Configuration files have two formats for the auto-provisioning. one is the
general configuration files used for the general provisioning and other one is
the MAC-based configuration provisioning.
The difference between the two types of configuration files is shown as
below:
General configuration provisioning: a general file is stored in a server
from which all the related devices will be able to download the same
configuration file to update parameters on the devices. For example
：
r000000000083.cfg.
MAC-based configuration provisioning: MAC-based configuration files is
used for the auto-provisioning on a specific device as distinguished by
its unique MAC number. And the configuration files named with device
MAC number will be matched automatically with the device MAC number
before being downloaded for the provisioning on the specific device.
Note:
If a server has these two types of configuration files, then IP
devices will first access the general configuration files before
accessing the MAC-based configuration files.
18.3.AutoP Schedule
Akuvox provides you with different Autop methods that enable the access
control terminal to perform provisioning for itself in a specific time according
to your schedule. To configure the configuration on web System > Auto
Provisioning > Automatic Autop interface.
To Next Page
Loading...
Need help?
General
