A03S Access Control Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
18. Auto-provisioning
Configurations and upgrading on A03S access control terminal can be done
on the web interface via one-time auto-provisioning and scheduled auto-
provisioning via configuration files, thus saving you from setting up
configuration needed one by one manually on the access control terminal.
18.1.Provisioning Principle
Auto-provisioning is a feature used to configure or upgrade the devices in
batch via third party servers. DHCP, PNP, TFTP, FTP, HTTPS are the protocols
used by the Akuvox intercom devices to access the URL of the address of the
third-party server which stores configuration files and firmware, which will
then be used to update the firmware and the corresponding parameters on
the access control terminal.
To Next Page
Loading...
Need help?
General
