A03S Access Control Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
15. Debug
15.1.System Log for Debugging
System log in the access control terminal can be used for debugging
purpose. If you want to export the system out to a local PC or to a remote
server for debugging, you can set up the function on the web System >
Maintenance > System Log interface.
Parameter Set-up:
Log Level: select log levels from 1 to 7 levels. You will be instructed by
Akuvox technical staff about the specific log level to be entered for
debugging purpose. The default log level is 3, the higher the level is 5, the
more complete the log is 7.
Export Log: click the Export tab to export temporary debug log file to a
local PC.
Remote System Log Enabled: select Enable or Disable if you want to
enable or disable the remote system log.
Remote System Server: enter the remote server address to receive the
device log. And the remote server address will be provided by Akuvox
technical support.
To Next Page
Loading...
Need help?
General
